All heavy-duty trucks are reloaded on axles (wheels) by means of loading (the brake platform is lifted as a whole), which meets the requirements of the latest national standards GB21861-2014 and GB18565 for loading brake inspection equipment.
| Type | FJZ-13L | FJZ-13M |
| Maximum Axle load mass（t） | 13 | 13 |
| Braking force test range（dAN） | 0~3900x2 | 0~3900X2 |
| Diameter x Length Of Roller（mm） | Ф245×1100 | Ф245×1100 |
| Inner width x Outer width Of Roller（mm） | 800x3000 | 800X3000 |
| Rollers Center Distance（mm） | 467 | 467 |
| Height difference between front and rear rollers（mm） | 30 | 30 |
| Host size（mm） | 4752x1170x750 | 4752X1210X840 |
| Rated power | 2x15KW | 2x15KW |
| Rated voltage | AC 380V | AC 380V |
| Rated speed | 1450r/min | 1450r/min |
| Braking Force Resolution | 1dAN | 1dAN |
Braking force indication error: no more than ±3%
Error of weighing indication: no more than ±2%
Air pressure: 0.8Mpa-1.00 Mpa, in order to avoid damage to the solenoid valve, the air compressor needs to be dewatered, oiled and filtered before entering the equipment (the air filter is provided by the user); the air source is to the table body inlet The inner diameter of the tube at the place should not be less than φ25mm, and the air pressure of the lift airbag should not be less than 0.7 Mpa when the vehicle is out.
Electromagnetic valve: double coil (self-locking) AC 220V
Working conditions:
1. Power supply: motor (strong electric box) AC 380V Three phase four-wire instrument AC220V single-phase three-wire ±10%, 50HZ
2. Clean air source: pressure 0.8Mpa, before entering the equipment, the air compressor needs to be dewatered, degreasing and filtered before entering the equipment (the air filter is provided by the user);
3. Table body lifting hydraulic station, working pressure 12Mpa.
4. Ambient temperature: 0～40℃; relative humidity: ≤90%